Study of the mechanical behaviour of materials, in particular, the development of the techniques for characterising the state of residual stresses in poly-crystalline materials. In this context, the study of residual stresses, their genesis, their determination, their evolution and their effect have been particularly prominent in my work.

Research Highlights

• Effect of heat treatment on microstructure and residual stress fields of a weld multilayer austenitic steel clad
  M. J. Marques, A. Ramasamy, A.C. Batista, J.P. Nobre, A. Loureiro
  Journal of Materials Processing Technology 222, 52-60 (2015)

Publications [LaTeX]

Papers

International Journals

1 - Failure analysis of fatigue crack propagation in specimens of AlSi10Mg aluminum alloy produced by L-PBF: Effect of different heat treatments
R.F. Fernandes, J.S. Jesus, L.P. Borrego, J.A.M. Ferreira, R. Branco, J.D. Costa, A.C. Batista, M.J. Marques
Eng. Fail. Anal. 163 (B), 108595 (2024)

2 - Influence of post-processing milling conditions on the machinability and residual stresses evolution of LPBF 18Ni300 maraging steel
M. Duro, T. Silva, M.J. Marques, A.C. Batista, P. Rosa, A. M. Jesus
International Journal of Advanced Manufacturing Technology 127, 2287-2297 (2023)

3 - Experiments for the Quantification of the Initial Stress State in UIC Parabolic Leaf Springs
V. M. G. Gomes, M.J. Marques, M. Figueiredo, J.A.F.O. Correia, A.C. Batista, R. Calçada, A. M. P. Jesus
Procedia Structural Integrity 48, 142-148 (2023)

4 - Comparative Study of the Wear Behavior of B4C Monolayered and CrN/CrCN/DLC Multilayered Physical Vapor Deposition Coatings Under High Contact Loads: An Experimental Analysis
F. J. G. Silva, R. C. B. Casais, A. P. M. Baptista, M. J. Marques, V. M. C. Sousa, R. Alexandre
J. Tribol. 144 (3), 031701-031715 (2022)

5 - Quantification of Residual Stress Relief by Heat Treatments in Austenitic Cladded Layers
J. Rebelo-Kornmeier, M.J. Marques, W. Gan, A.C. Batista, S. Paddea, A. Loureiro
Materials 15 (4), 1364 (2022)

6 - Experimental study on the wear behavior of B4C and TiB2 monolayered PVD coatings under high contact loads
Rafaela Casais, António Monteiro Baptista, Francisco José Silva, Fátima Andrade, Vitor Sousa, Maria José Marques
Int. J. Adv. Manuf. Technol. (2022)

7 - Rolling and Rolling-Sliding Contact Fatigue Failure Mechanisms in 32 CrMoV 13 Nitrided Steel—An Experimental Study
Coelho, L., Batista, A.C., Nobre, J.P., Marques, M.J.
Applied Sciences 11, 10499, 1-14 (2021)

8 - Numerical Modeling and Prediction of Residual Stresses in AISI 316L and 18Ni300 Steels Produced by Selective Laser Melting
J. Gil, M. Pires, F. Fiorentin, M. J. Marques, A. Castanhola, M. Parente, A. de Jesus,
Procedia Structural Integrity 34, 6-12 (2021)

9 - Comparison between EDM and grinding machining on fatigue behaviour of AISI D2 tool steel
Abílio M.P. de Jesus, Gisela F.S. Ramos, Vítor M.G. Gomes, Maria J. Marques, Miguel A.V. de Figueiredo, José D.R. Marafona
Int. J. Fatigue 139, 105742 (2020)

10 - Texture Characterization of Stainless Steel Cladded Layers of Process Vessels
J. Rebelo-Kornmeier, W.M. Gan, M.J. Marques, A.C. Batista, M. Hofmann, A. Loureiro
Materials Science Forum 879, 1588-1593 (2017)

11 - Effect of heat treatment on microstructure and residual stress fields of a weld multilayer austenitic steel clad
M. J. Marques, A. Ramasamy, A.C. Batista, J.P. Nobre, A. Loureiro
Journal of Materials Processing Technology 222, 52-60 (2015)

12 - Assessing shot-peening residual stresses by using the incremental hole-drilling technique and laser interferometry (DSPI)
J. P. Nobre, M. Oliveira, A. Albertazzi, M. Viotti, A.C. Batista, L. Coelho, M. J. Marques
Advanced Materials Research 996, 269-276 (2014)

13 - Residual Stresses Induced by Dry and Cryogenic Cooling during Machining of AZ31B Magnesium Alloy
J.C. Outeiro, A.C. Batista, M.J. Marques
Advanced Materials Research 996, 658-663 (2014)

14 - Residual Stresses Induced by Cryogenic Cooling during Machining of AZ31B Magnesium Alloy
J.C. Outeiro, A.C. Batista, M.J. Marques
Advanced Materials Research, 658-663 (2014)

15 - Evaluation of Residual Stresses Induced by Ultra-high-Speed Drilling in Aluminium alloys
J.P. Nobre, R. Guimarães, A.C. Batista, M.J. Marques, L. Coelho, A. Nau, B. Scholtes
Materials Science Forum 768-769, 128-135 (2014)

16 - Residual Stresses Profiles of Cladded Austenitic Stainless Steel Evaluated by X-Ray Diffraction and by Incremental Hole-Drilling Method
M.J. Marques, A.C. Batista, L. Coelho, J.P. Nobre, A. Loureiro
Materials Science Forum 768-769, 464-469 (2014)

17 - A utilização da difração de neutrões na determinação do perfil de tensões residuais em revestimentos por soldadura
M.J. Marques, A.C. Batista, J.P. Nobre, A. Loureiro, J.R. Kornmeier
Soldag. Insp., São Paulo, Brasil 18(2), 149-157 (2013)

18 - The use of neutron diffraction for the determination of the in-depth residual stresses profile in weld coatings
Maria José Marques, A. C. Batista, J. P. Nobre, Altino Loureiro, Joana R. Kornmeier
Soldag. insp. [online] 18 n.2, 149-157 (2013)

19 - Evaluation of Stress-Strain Behaviour of Surface Treated Steels by X-ray Diffraction
L. Coelho, A. C. Batista, J. P. Nobre, M. J. Marques
Central European Journal of Engineering 2(1), 91-95 (2012)

20 - Evaluation of Stress-Strain Behavior of Surface Treated Steels by X-ray Diffraction
L. Coelho, A.C. Batista, J.P. Nobre, M.J. Marques
Central European Journal of Engineering 2(1), 91-95 (2012)

21 - Libxc: a library of exchange and correlation functionals for density functional theory
M.A.L. Marques, M.J.T. Oliveira, T. Burnus
Computer Physics Communications 183, 2272-2281 (2012)

22 - Quantifying the Drilling Effect during the Application of Incremental Hole-Drilling Technique in Laminate Composites
J.P. Nobre, J.-H. Stiffel, W. Van Paepegem, A. Nau, A.C. Batista, M.J. Marques, B. Scholtes
Materials Science Forum 681, 510-515 (2011)

23 - Residual Stress Fields after Heat Treatment in Cladded Steel of Process Vessels
M.J. Marques, A.C. Batista, J.R. Kornmeier, M. Hofmann, J.P. Nobre, A. Loureiro
Materials Science Forum 681, 364-369 (2011)

24 - Surface Integrity of H13 ESR Mould Steel Milled by Carbide and CBN Tools
Marques, M. J., Outeiro, J., Dias, A. M., M ´Saoubi, R., Chandrasekaran, H.
Advanced Materials Forum III, Trans Tech Publications Ltd. 514-516, 564-568 (2006)

25 - Influence of Surface Roughness in the Quality of the Data obtained by Pseudo-Grazing Incident X-ray Diffraction
Marques, M. J., Pina, J., Dias, A. M.
Advanced Materials Forum III, Trans Tech Publications Ltd. 514-516, 1618-1622 (2006)

26 - Stress and Texture Analysis in Thin Films and Coatings by X-ray Diffraction
Pina, J., Marques, M. J., Santos, J. M. M., Dias, A. M.
Advanced Materials Forum III, Trans Tech Publications Ltd. 514-516, 1613-1617 (2006)

27 - X-ray diffraction characterization of ion-implanted austenitic stainless steel
M J Marques, J Pina, A M Dias, J L Lebrun and J Feugeas
Surface & Coatings Technology 195, 8-16 (2005)

28 - Relaxation of residual stresses on the near surface of carbon steel substrates due to plasma cleaning
Marques, M.J., Dias, A.M., Gautier-Picard, C., Lebrun, J.L.
Key Engineering Materials 230-232, 152-156 (2002)

29 - A Methodology Development for the Study of Near Surface Stress Gradients
M. J. Marques, A. M. Dias, P. Gergaud, J. L. Lebrun
Materials Science & Engineering A 287, 78-86 (2000)

Proceedings

International Conferences

30 - Towards Validation of the Incremental hole-drilling method in fibre metal laminate
J.P. Nobre, Q. Qhola, T.C. Smit, T. Wu, M.J. Marques, A.C. Batista
Proceedings ICEM20, Experimental Mechanics in Engineering and Biomechanics, 20th International Conference on Experimental Mechanics, 363-366 (2023)

31 - In-depth residual stresses profiles by X-ray diffraction in milled AISI 18Ni300 samples produced by Laser Powder Bed Fusion and by conventional process
M. J. Marques, A. C. Batista, J. P. Nobre, Miguel Duro, Tiago Silva, Abílio de Jesus
Proceedings ICEM20, Experimental Mechanics in Engineering and Biomechanics, 20th International Conference on Experimental Mechanics, 1105-1106 (2023)

32 - Fatigue notch sensitivity of AISI D2 tool steel machined by EDM
A. Jesus, G.F.S. Ramos, M.A.V. Figueiredo, J.D.R. Marafona, M.J. Marques
Proceedings of the 12th International Fatigue Congress – FATIGUE2018, 598 (2018)

33 - Diffraction versus mechanical methods. Local against global residual stress state for coarse grain material.
M. J. Marques, A.C. Batista, J. Rebelo Kornmeier, S. Paddea, M. Hofmann, W. Gan, A. Loureiro
10th European Conference on Residual Stresses-ECRS10, abstract book, 73 (2018)

34 - Local Texture Characterization of Stainless Steel Cladding using Neutron Diffraction
J. Rebelo Kornmeier, W.M. Gan, M.J. Marques, A.C. Batista, M. Hofmann, A. Loureiro
Conferência Materiais 2017- XVIII Congresso da Sociedade Portuguesa de Materiais and VIII International Symposium on Materials, abstract book, 160 (2017)

35 - Effects of Electrical Discharge Machining on Fatigue Behaviour of AISI D2 Steel
Ramos, Gisela F.S., de Figueiredo, Miguel A.V., Marafona, José D.R., Marques, Maria J., De Jesus, Abílio M.P.
Proceedings of the 2nd International Conference on Structural Integrity (2017)

36 - Local Texture Characterization and Residual Stress Charactherization of Cladded Layers in Process Vessels using Neutron Diffraction
Rebelo Kornmeier, J., Gan, W.M. Gan, Marques, M.J., Batista, A.C., Loureiro, A., Hofmann, M., Gnaupel-Herold, T.
10th International Conference on Residual Stresses (ICRS10), abstract book, 103 (2016)

37 - Study of the influence of post weld heat treatment (PWHT) on the salt spray corrosion behavior of 316L steel clad
Anandkumar Ramasamy , Ricardo Martins, Maria José Marques, António Batista, Altino Loureiro, Christopher M. A. Brett
European Corrosion Congress EUROCORR2013 1st a 5th september 2013, Estoril, Portugal, 483-484 (2013)

38 - Residual Stresses Profiles of Cladded Austenitic Stainless Steel By Incremental Hole Drilling Method
Maria José Marques, António Batista, Luís Coelho, João Paulo Nobre, Altino Loureiro
Experimental Mechanics (New Trends and Perspectives), Proceedings of the 15th International Conference on Experimental Mechanics (ICEM15), 145-146 (2012)

39 - Evaluation of Stress-Strain Behavior of Surface Treated Steels by X-ray Diffraction
L. Coelho, A. C. Batista, J. P. Nobre, M. J. Marques
Proc. of the European Conference on X Ray Spectrometry (EXRS 2010) (2010)

40 - Residual Stress Fields after Heat Treatment in Cladded Steel of Process Vessels
M. J. Marques, A. Castanhola Batista, J. Rebelo Kornmeier, M. Hofmann, J. P. Nobre, A. Loureiro
3rd FRM II User Meeting, abstract book, 98 (2010)

41 - Effect of heat treatment on residual stress fields in cladded steel tube header sheets of reactor pressure vessels
Marques, M. J., Batista, A. C., Kornmeier, J., Loureiro, A.
Actas do 8.º Congresso Nacional de Mecânica Experimental, 163-164 (2010)

42 - Surface Integrity of D2 and D2 - 8% Cr Tool Steel Milled Using Cemented Carbide and CBN Cutting Tools
M. J. Marques, J. C. Outeiro, A. M. Dias, R. M´ Saoubi and H. Chandrasekaran
(2008)

43 - Tool life and surface integrity in hard milling of hot work tool steels
R. M ´Saoubi, H. Chandrasekaran, B. Coulon, M. J. Marques and J. C. Outeiro
Proc. 3rd CIRP International Conference “High Performance Cutting - Micromachining”, 11-20 (2008)

44 - Determinação de Tensões Residuais por Difracção de Raios X em Incidência Pseudo Rasante
J. C. Pina, M. J. Marques, A. M. Dias
Actas da 12ª Conferência Nacional de Física, 10º Encontro Ibérico para o Ensino da Física, 410-411 (2000)

45 - Effects of Plasma Cleaning of a Carbon Steel Substrate Studied by Pseudo-Grazing Incidence X-Ray Diffraction
M. J. Marques, A. M. Dias, C. Gautier-Picard, J. L. Lebrun
Proc. 6th International Conference on Residual Stresses (ICRS6) 1, 685-692 (2000)

46 - Mechanical Stiffness and X Ray Elastic Constants of Thermally-Sprayed Coatings
J. Pina, M. J. Marques, A. Dias, A. Gonçalves, J. L. Lebrun
Proc. 5th International Conference on Residual Stresses (ICRS5) 2, 946-951 (1997)

47 - Residual Stress Depth Profile on Ion Implanted Austenite Stainless Steel
M. J. Marques, A. M. Dias, P. Gergaud, J. L. Lebrun, J. Feugeas, G. Sanchez
Proc. 5th International Conference on Residual Stresses (ICRS5) 5th International Conference on Residual Stresses (ICRS5) Linköping, Sweden, June 16-18, ed. T. Ericsson et al.,Institute of Technology, Linköping Universitet 2, 976-981 (1997)

48 - Propriedades Mecânicas e Tribológicas de Revestimentos de WC-Co obtidos por Projecção Térmica APS e HVOF
J. Pina, M. J. Marques, L. Coelho, A. M. Dias, A. Gonçalves, J. L. Lebrun, R. J. Gras
Actas do XIII Congresso Brasileiro e II Congresso Ibero Americano de Engenharia Mecânica (XIII COBEM/II CIDIM) XIII Congresso Brasileiro e II Congresso Ibero Americano de Engenharia Mecânica (XIII COBEM/II CIDIM) ed. Associação Brasileira de Ciências Mecânicas, Belo Horizonte, Brasil publicação em CD-ROM (1995)

49 - Mechanical Properties and Residual Stresses of WC-Co Thermal-Sprayed Coatings
J. Pina, M. J. Marques, A. Dias, A. Gonçalves, J. L. Lebrun
Proc. 10th International Conference on Experimental Mechanics 10th International Conference on Experimental Mechanics ed. J.F. Silva Gomes et al., A.A. Balkema, Rotterdam 2, 745-750 (1994)

Communications

Invited

50 - Residual Stress Analysis in Metal Samples Manufactured by Selective Laser Melting
M. J. Marques, A.C. Batista, J. P. Nobre
1st Workshop on Instrumented Indentation Test for Industry, Politecnico di Torino, Italy, 20th October (2023)

51 - Análise de Tensões Residuais
M.J. Marques, A.C. Batista, J.P. Nobre
Seminário "Tendências e Desafios da Maquinagem", organizado pelo INEGI e pela SPM - Sociedade Portuguesa de Materiais, INEGI, Porto, 27 Junho 2022, 9:00h-15:30h. (2022)

52 - Diffraction versus mechanical methods. Local against global residual stress state for coarse grain material
M. J. Marques, A.C. Batista, J. Rebelo Kornmeier, S. Paddea, M. Hofmann, W. Gan, A. Loureiro
10th European Conference on Residual Stresses-ECRS10, Leuven, Belgium, 11-14 September, 2018, Keynote Lecture (2018)

53 - Princípios e fundamentos das técnicas de determinação de tensões residuais
António C. Batista, João Paulo Nobre, Maria José Marques
(2012)

54 - A utilização da difração de neutrões na determinação do perfil de tensões residuais em soldaduras
Maria José Marques, António C. Batista, Joana R. Kornmeier, João Paulo Nobre e Altino Loureiro
1.ª Conferência Nacional em Tratamentos de Soldaduras (CNTS) (2012)

55 - Stress nos Materiais
Maria José Marques
Departamento de Física da Universidade de Trás-os-Montes e Alto Douro Auditório da Biblioteca Central, Vila Real, 29 de Novembro de 2010. (2010)

Oral

56 - Towards Validation of the Incremental hole-drilling method in fibre metal laminate
J.P. Nobre, Q. Qhola, T.C. Smit, T. Wu, M. J. Marques, A.C. Batista
20th International on Experimental Mechanics, 2-7 July, 2023, Porto (2023)

57 - In-depth residual stresses profiles by X-ray diffraction in milled AISI 18Ni300 samples produced by Laser Powder Bed Fusion and by conventional process
Maria José Marques, António Castanhola Batista, João Paulo Nobre, Miguel Duro, Tiago Silva, Abílio de Jesus
20th International on Experimental Mechanics, 2-7 July, 2023, Porto (2023)

58 - Residual stresses evaluation by X-ray diffraction and incremental hole drilling in AISI 316L and AISI 18Ni300 samples produced by Selective Laser Melting
M.J. Marques, A.C. Batista, J.P. Nobre, L. Coelho, A.M.P. de Jesus
11th International Conference on Residual Stresses (ICRS11) March 27-30, 2022, Nancy, France. (2022)

59 - Numerical Modeling and Prediction of Residual Stresses In AISI 316L And 18Ni300 Steels Produced By Selective Laser Melting
J. W. Gil, F. K. Fiorentin, M. J. Marques, A. Castanhola, J. P. Nobre, A. M. P. De Jesus
2nd European Conference on the Structural Integrity of Additively Manufactured Materials – ESIAM21, Virtual Conference, 8-10 September (2021)

60 - Residual Stresses in AISI 316L and 18Ni300 steels produced by Selective Laser Melting
M. J. Marques, A.C. Batista, J. P. Nobre, F. Fiorentin, A. M. P. Jesus
2nd European Conference on the Structural Integrity of Additively Manufactured Materials – ESIAM21, Virtual Conference, 8-10 September (2021)

61 - Fatigue notch sensitivity of AISI D2 tool steel machined by EDM
A. Jesus, G.F.S. Ramos, M.A.V. Figueiredo, J.D.R. Marafona, M.J. Marques
12th International Fatigue Congress – FATIGUE2018, 27 May -1st June 2018, Poitier, Futuroscope, France (2018)

62 - Effects of Electrical Discharge Machining on Fatigue Behaviour of AISI D2 Steel
Gisela F.S. Ramos, Miguel A.V. de Figueiredo, José D.R. Marafona, M. J. Marques, Abílio M.P. de Jesus
2nd International Conference on Structural Integrity, Funchal, Madeira, Portugal, 4-7 September 2017 (2017)

63 - Local texture and residual stress characterization of cladded layers in process vessels using neutron diffraction
J. Rebelo Kornmeier, W. M. Gan, M. J. Marques, A. C. Batista, A. Loureiro, M. Hofmann, T. Gnäupel‑Herold
10th International Conference on Residual Stresses (ICRS10), Sydney, Australia, 3-7 July (2016)

64 - Texture Characterization of Stainless Steel Cladded Layers of Process Vessels
J. Rebelo Kornmeier, W. M. Gan, M. J. Marques, A. C. Batista, M. Hofmann, A. Loureiro
International Conference on Processing & Manufacturing of Advanced Materials. Processing, Fabrication, Properties, Applications. May 29-June 3, Graz, Austria. (2016)

65 - Assessing shot-peening residual stresses by using the incremental hole drilling technique and laser interferometry (DSPI)
J.P. Nobre, M. Oliveira, A. Albertazzi, M. Viotti, A.C. Batista, L. Coelho, Maria José Marques
9th European Conference on Residual Stresses, ECRS-9, July 7-10, 2014, Troyes, França (2014)

66 - Residual Stresses Induced by Cryogenic Cooling during Machining of AZ31B Magnesium Alloy
M.J. Marques, A.C. Batista, J.C. Outeiro
9th European Conference on Residual Stresses, ECRS-9, July 7 10, 2014, Troyes, França (2014)

67 - Residual Stresses Profiles of Cladded Austenitic Stainless Steel By Incremental Hole Drilling Method
Maria José Marques, António Batista, Luís Coelho, João Paulo Nobre, Altino Loureiro
(2012)

68 - Desenvolvimento de nanocompósitos para dispositivos ligamentares
V. C. Pinto, M. J. Marques, R. M. Guedes
(2012)

69 - Quantifying the Drilling Effect during the Application of Incremental Hole-Drilling Technique in Laminate Composites
J. P. Nobre, J. H. Stiffel, W. V. Paepegem, A. Nau, A. C. Batista, M. J. Marques, B. Scholtes
(2010)

70 - Estudo de alguns aspectos do movimento unidimensional utilizando um carril de ar e uma câmara de infravermelhos
Maria José Marques, Paulo Araújo Sá
(2010)

71 - Effect of heat treatment on residual stress fields in cladded steel tube header sheets of reactor pressure vessels
Marques, M. J., Batista, A. C., Kornmeier, J., Loureiro, A.
(2010)

72 - Surface Integrity of H13 ESR Mould Steel Milled by Carbide and CBN Tools
Marques, M. J., Outeiro, J., Dias, A. M., M´Saoubi, R., Chandrasekaran, H.
3rd International Materials Symposium and 12th Portuguese Materials Society Meeting, 20 23rd March 2005, Aveiro, Portugal. (2005)

73 - Stress and Texture Analysis in Thin Films and Coatings by X-ray Diffraction
Pina, J., Marques, M. J., Santos, J. M. M., Dias, A. M.
(2005)

74 - Relaxation of residual stresses on the near surface of carbon steel substrates due to plasma cleaning
M. J. Marques, A. M. Dias, C. Gautier Picard, J. L. Lebrun
Proc. of 1st International Materials Symposium, 9-11 April, 2001, Coimbra, Portugal (2001)

75 - Effects of Plasma Cleaning of a Carbon Steel Substrate Studied by Pseudo-Grazing Incidence X-Ray Diffraction
M. J. Marques, A. M. Dias, C. Gautier-Picard, J. L. Lebrun
(2000)

76 - Residual Stress Depth Profile on Ion Implanted Austenite Stainless Steel
M. J. Marques, A. M. Dias, P. Gergaud, J. L. Lebrun, J. Feugeas, G. Sanchez
5th International Conference on Residual Stresses (ICRS5) June 16-18, 1997, Institute of Technology, Linköping Universitet, Sweden. (1997)

77 - Propriedades Mecânicas e Tribológicas de Revestimentos de WC-Co obtidos por Projecção Térmica APS e HVOF
J. Pina, M. J. Marques, L. Coelho, A. M. Dias, A. Gonçalves, J. L. Lebrun, R. J. Gras
XIII Congresso Brasileiro e II Congresso Ibero Americano de Engenharia Mecânica (XIII COBEM/II CIDIM), 12-15 Dezembro, 1995, Belo Horizonte, Brasil. (1995)

Poster

78 - Study of the influence of post weld heat treatment (PWHT) on the salt spray corrosion behavior of 316L steel clad
Anandkumar Ramasamy , Ricardo Martins, Maria José Marques, António Batista, Altino Loureiro, Christopher M. A. Brett
European Corrosion Congress EUROCORR2013, 1st a 5th september 2013, Estoril, Portugal (2013)

79 - Residual Stresses Profiles of Cladded Austenitic Stainless Steel Evaluated by X-Ray Diffraction and by Incremental Hole-Drilling Method
M.J. Marques, A.C. Batista, L. Coelho, J.P. Nobre, A. Loureiro
(2012)

80 - Surface Integrity of H13 ESR Mould Steel Milled by Carbide and CBN Tools
Marques, M. J., Outeiro, J., Dias, A. M., M´Saoubi, R., Chandrasekaran, H.
3rd International Materials Symposium and 12th Portuguese Materials Society Meeting, 20-23rd March 2005, Aveiro, Portugal. (2005)

81 - Influence of Surface Roughness in the Quality of the Data obtained by Pseudo-Grazing Incident X-ray Diffraction
Marques, M. J., Pina, J., Dias, A. M.
Influence of Surface Roughness (2005)

Thesis

82 - Comparaison de Procédé de Revêtement Cermet. Microstructure et Mécanique de Couches WC-Co
M. J. Marques
(1993)

PhD thesis

83 - Evaluation of Residual stresses by Pseudo-Grazing Incidence X-Ray Diffraction
M. J. Marques
Ph. D. thesis in Mechanical Engineering, University of Coimbra (2001)

Thesis supervised

• Residual Stresses in Additive Manufacturing
  Ana Beatriz Lopes
  MSc thesis, Master Thesis in Physics Engineering, Univ. Coimbra (2021)

Knowledge Transfer

Projects

• Estudo de novos materiais e processos tecnológicos por difracção de raios X
• Evaluation of Residual Stresses in Surface Layers and Thin Films by Grazing-Incidence X Ray Diffraction
• MAMTool - Machinability of Additive Manufactured Parts for Tooling Industry
• Microestruturas e mecânica de revestimentos
• STRESSCLAD – Effect of heat treatment on residual stress fields and corrosion behaviour of weld cladded walls
• STRESSCLAD – Influência do tratamento térmico no campo de tensões residuais e no comportamento à corrosão de revestimentos por soldadura
• Tool steels for hard milling with improved machinability and product economy

Management

Outreach

International Collaborations